A containment berm is only as good as the accessories that protect it, and ENPAC's Ground Pad is second to none. The three-layer construction deflects sharp objects from puncturing the sump from below, prevents "hot-spots" from turning wheels, and won't absorb dirt or water.

• Fit to size of the containment berm
• Durable, 3-layer design
• Deflects debris from below the berm to prevent punctures
• Reduces friction that can lead to hot-spots that ruin berms
• Lightweight and easy to use

• Once a vehicle has entered or exited, the walls automatically spring back to their vertical position.
• Entry and exit walls are supported every 12" with a patented "living hinge".
• Both long sidewalls are held upright by PVC sidewall assemblies.  Simply swivel the feet to lower the sidewalls for storage or transport to another location.

• Sidewalls remain down during normal operations, loading and unloading. Vehicles and equipment can drive in and out with no set-up or take-down required.
• In the case of a spill, the foam ring around the top perimeter of the Containment Berm rises with the level of spilled liquid.
• Standard material of construction is Copolymer 2000.
• Helps meet EPA Container Storage Regulation 40 CFR 264.175 and SPCC requirements.

• This compact and lightweight model requires no inflation
• Protects heavy equipment from spills during filling, cleaning and maintenance
• Smaller sizes provide total containment of drums, tanks, generators, compressors and other equipment
• Sidewalls lower quickly to allow drive in/drive out

This basic repair kit serves as a temporary solution for minor tears in your containment berm. Simply cut the sheet to size, peel off the backing, and stick it in place. 

• Includes five 8.5"x11" sheets
• Deluxe kits available for long term repair

 SPECIFICATIONS:

• Dimensions: 8”W x 11”L
• Weight: 1 lbs.

• For use with Ultra-Berm Builder Kit
• 10.3 fl. oz. Tubes

• For use with Ultra-Berm Builder Kit
• Corner measures 7 1/4"X 5.5" x 2"

The full kit includes:

• (2) 25 foot Ultra-Berm Builder Walls
• (4) Ultra-Berm Builder Corners
• (6) Floor Sealant Tubes
• (1) 10 foot section of Connector Collar
• (1) 8 0z Industrial Vinyl Adhesive

Repair your berm like a pro with this deluxe set that contains everything needed to re-seal your berm in case of a tear. The included welding gun reaches temperatures that mimic the original welding conditions that created the berm, while extra stays keep your sidewalls sturdy. 

Includes: 

• Leister professional heat gun
• 1 sq. yd. XR material 
• 1 sq. yd. PVC
• (4) 12" replacement stays
• 5 peel and stick quick repair patches
• 1 roller
• 1 cutting knife
• 1 lockable tool box

 SPECIFICATIONS:

• Dimensions: 24" L x 12" W x 12" H
• Weight: 15 lbs.

• Dimensions - 10'w X 18'l X 4"
• Sump Capacity:  425 Gallons
• Portable,drive through station

• Dimensions - 6'w X 20'l X 8"
• Sump Capacity:  598 Gallons
• Four zones

• Dimensions - 8'w X 10'l X 8"
• Sump Capacity:  398 Gallons
• Portable, versatile containment deploys quickly for emergency spill response